Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Hidden Hills
Gate parts and welding work in Hidden Hills means a few different things than it does almost anywhere else in California. First, every job starts at the community guard gate before we reach your driveway. Second, the gates themselves are usually bigger, heavier, and older than what you see in most neighborhoods. Third, the Hidden Hills Community Association keeps a close eye on how repairs look, which means the hinge, the post, and every weld need to match the ranch character of the property. We plan for all of it. If your gate is sagging, dragging, or coming off its hinges, call (213) 293-3886 and we’ll get a straight answer on what it takes to fix it.
Why Ironworks Gate Co. Is Hidden Hills’s Preferred Gate Parts & Welding Company
Ironworks Gate Co. has spent 42 years working on exactly one kind of job: driveway and estate gates. That focus matters in Hidden Hills, where the typical entrance is a wide swing or slide gate on a one-acre-plus ranch lot, often paired with a secondary paddock gate. We are not a general handyman service squeezing a gate repair between two other jobs. Our crews arrive in uniformed trucks, background-checked, and carry the parts and the welding gear to do the work on the first visit.
Victor Salinas leads our Gate Parts & Welding team, and he holds the crew to one standard: if it is not right, we come back and make it right. That is not a slogan. It is the 90-Day Done Right Promise, written on every job. For Hidden Hills homeowners who have watched a gate sag twice a year for a decade, the promise is the difference between patching a problem and ending it.
And when you call, a live person answers. Not a voicemail. Not an answering service. Twenty-four hours a day, seven days a week.
Our Gate Parts & Welding Services in Hidden Hills
Hinge Replacement
Hinges take the full abuse on a big gate. In Hidden Hills, we routinely replace hinges that were sized for a manual gate but are now carrying the torque of a motor. An undersized hinge pin bends. The gate drops a half inch. Then the latch stops lining up and the opener works against itself until it burns out. A proper hinge replacement in Hidden Hills is about matching the load, not just swapping hardware. We stock heavy-gauge barrel hinges and weldable strap hinges sized for ranch gates, and we fit them so the gate hangs true before the operator ever comes back online.
Post Replacement
Gate posts in Hidden Hills fail two ways. The first is slow: decades of dry heat and occasional frost loosening the footing until the post leans a few degrees and the gate starts scraping the ground. The second is sudden: Santa Ana winds hammering a wide gate sideways until a galvanized post develops a fatigue crack at the base. We remove the old post, pour a new footing sized for the gate’s full weight and wind load, and set the post plumb and square. On most Hidden Hills properties we coordinate with the HOA on finish and style before any metal goes in the ground.
Rail Repair
Slide gates on Hidden Hills ranches have long runs of rail that live outdoors all year. They take heat in summer, dew in winter, and whatever the wind carries across the paddock. We straighten bent rail, repair broken welds at the joints, and replace sections that are too far gone to save. If leaves from your oaks keep jamming the track, we’ll also check the rack and pinion alignment, because a track that fights the wheels every day is wearing out the gear in your opener.
Custom Welding
Some repairs should not be bolted. When a gate post has rusted through at ground level, when a hinge bracket has torn away from the panel, or when a new operator arm needs a mounting plate the old gate never had, we weld it. We fabricate on site and match the existing finish as closely as the material allows. Hidden Hills gates carry an aesthetic standard, and we respect that. The weld should look like it belongs to the gate, not like it was stuck on as a patch. Victor’s standard is that you should not be able to pick out our repair from ten feet away.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Hidden Hills
Most Hidden Hills gates are older, and many of them were automated years after they were built. That means we see a mix of hardware: LiftMaster operators on retrofitted swing gates, FAAC hydraulics on long slide runs, and BFT control boards tucked into weather-stained boxes. Our technicians are trained and equipped on all of them, along with six other major brands, so the diagnosis is correct the first time. We carry common replacement parts in our trucks, and what we do not have on hand we can usually source the same day through our parts network. If your opener brand is not listed here, ask. We have probably worked on it.
Common Gate Parts & Welding Problems We See in Hidden Hills Homes
- Sagging swing gates from undersized posts. Legacy manual gates built in the 1960s and 70s were never designed for motorized torque. The post shifts, the gate drops, and the whole system strains. We correct the sag by resetting the post and re-hanging the gate with properly sized hinges.
- Slide-gate tracks jammed with oak leaves and wind debris. Hidden Hills lots are covered in mature oaks, and Santa Ana winds fill slide tracks in a single afternoon. Rollers grind, the rack bends, and the gate stalls halfway. We clear the track, replace worn rollers, and straighten the rack.
- Wood gate panels warped by triple-digit heat. A heavy wood gate that bakes in summer sun can twist enough that the latch no longer reaches the striker. Sometimes the panel needs straightening; sometimes the hinges need shimming. Either way, the opener stops fighting the gate once the alignment is right.
- Welded repairs from previous handymen that failed. We see a lot of hidden welds with poor penetration, especially on hinge brackets and post caps. Rust gets in, the weld cracks, and the gate drops again. We cut out the old weld and redo it properly, then seal and finish it for the weather.
Pricing for Gate Parts & Welding in Hidden Hills, CA
Hinge replacement on a typical Hidden Hills swing gate runs $280 to $560, depending on the hinge size and whether we are welding or bolting. Post replacement is the bigger job: $650 to $1,400 when a new concrete footing is required, and more if the post is ornamental or oversized. Rail repair and track work runs $180 to $520 for most problems, including straightening and joint repair. Custom welding is quoted per job but a typical hinge bracket repair runs $140 to $300 per weld point. We quote the full price before any work starts and we do not change the number after the fact. Call (213) 293-3886 for an exact quote. Estimates are free.
Key takeaways: hinge work is the most common repair, post replacement is the most involved, and every Hidden Hills job includes coordination with the community entrance. We will give you the number before we start and it will not move.
We Also Serve Cities Near Hidden Hills
While this page is for our Hidden Hills neighbors, our crews regularly work in the surrounding communities of Agoura Hills, Malibu, Camarillo, and Moorpark. If you are just outside Hidden Hills and need gate parts or welding work, the same team, the same trucks, and the same 90-Day Done Right Promise apply. Learn more about our local coverage in Gate Parts & Welding in Hidden Hills.
Serving Hidden Hills, CA - Our Local Coverage Area
We’re based in the Hidden Hills area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Hidden Hills
Yes. Hidden Hills is the only incorporated city in California that is entirely gated, so every service call starts with clearing your name and address through the community guard gate before we reach your driveway. We handle that coordination for you. You just need to let us know the access procedure when you book the appointment, and our crew will follow it exactly. That two-layer access is part of life in Hidden Hills, and we have never been turned around at the gatehouse for not knowing the drill. Call (213) 293-3886 and we will walk you through the access details when you schedule.
We can, and we do it regularly. The Hidden Hills Community Association enforces strict aesthetic standards on gates, fencing, and hardware, so any replacement hinge or welded repair needs to match the ranch character of the property. We fabricate to match the existing dimensions and finish, and when the HOA requires pre-approval on materials, we can provide the specs and photos you need before we start. The goal is a repair that passes every review because it looks like it was always there. Call (213) 293-3886 and we will walk you through what your specific HOA situation requires.
The panel is rarely the root cause. On wide Hidden Hills gates, the usual culprit is an undersized hinge post that shifted in its footing years ago and was never reset. The post leans a little, the gate drops, and every Santa Ana event makes it worse. We fix this by resetting the post in a proper footing, replacing the hinges, and re-hanging the gate so it is plumb and true. If the panel itself is cracked or twisted, we can straighten or reinforce it, but the post is where the problem usually starts. Call (213) 293-3886 and we will diagnose it on site.
Yes. A lot of Hidden Hills lots are one acre or larger, and the gate at the end of the driveway is sometimes hundreds of feet from the nearest electrical panel. Running mains power that far is expensive. A solar opener with a battery bank is usually the smarter fix. We size the panel and the battery to the operator’s daily draw, which matters because Hidden Hills summers are hot and the solar panel works harder when the battery is cooking. We install Mighty Mule, LiftMaster, and Ghost Controls solar systems, and we will not undersell you a kit that cannot keep up. Call (213) 293-3886 for a free measure and a written price.
We can. Oak leaves are a constant battle for slide gates in Hidden Hills, especially along the mature tree lines on Long Valley Road and Round Meadow Road. The fix is usually three-part: replace the worn rollers, clean and straighten the track, and install a simple brush strip or leaf deflector that keeps most debris out of the track in the first place. We will also check the rack and pinion, because a track that keeps jamming will eventually wear the gear in your opener. Call (213) 293-3886 and we will get it rolling clean.
Call Ironworks Gate Co. for Gate Parts & Welding in Hidden Hills
If your gate is sagging, grinding, or stuck, call (213) 293-3886. We will give you a straight diagnosis, a written price before we start, and a 90-day promise that it stays fixed. Serving Hidden Hills with gate parts, welding, and the kind of care a 40-year-old gate deserves.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Hidden Hills and surrounding communities since 1984.