Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Calabasas
Gate installation in Calabasas runs from about $3,800 for a basic single swing driveway gate to $18,000 or more for a custom double gate with automation on a hillside estate. That’s a wide spread, and it exists because this city’s gates face conditions most other communities never see: 60 mph Santa Ana gusts off the Simi Hills, steep grades that demand heavier operators, and fire-code requirements tied to the Woolsey Fire rebuilds. If you’re weighing repair against replacement on a gate that’s been hanging since the late 80s or 90s, call us at (213) 293-3886. We’ll give you a straight answer and a written price before any work starts.
Why Ironworks Gate Co. Is Calabasas’s Preferred Gate Installation Company
We’ve been in the gate business for over 42 years, and a good share of that work has happened right here in the 91302 and 91372 ZIP codes. Calabasas homeowners tend to ask the same question: can you actually fix this, or are you going to sell me a new gate? The answer is usually fixable, and when it isn’t, we’ll show you why with the gate in front of us. For most issues, our Gate Repair - Calabasas team can restore it on the first visit. Our technicians are background-checked and uniformed. They work the way they’d work in their own mother’s driveway. That’s not a slogan; it’s the standard we hold, and it’s why much of our Calabasas work comes from referrals between neighbors in communities like Mulwood, Calabasas Hills, and the estates along Park Granada.
Our Gate Installation team is trained and equipped on nine major automation brands, including FAAC, BFT, and Linear, which matter a lot here. Calabasas HOA gates and older estate operators lean on FAAC and BFT hydraulic operators more than most cities in the Valley. If the board dies, the gate stays shut, and the HOA starts calling. We stock common parts for those brands and can usually get a community gate moving again on the same visit, not three visits later. And when you call, a live person answers, 24 hours a day. Every day. No voicemail, no call center, no “leave a message and we’ll get back to you Monday.”
Every job we complete in Calabasas carries the 90-Day Done Right Promise, in writing. If something isn’t right, we come back and make it right. No paperwork, no argument. It’s the same promise on the 400th job as the first. Victor Salinas set that standard when he took the lead here, and it hasn’t moved.
Our Gate Installation Services in Calabasas
Every installation we do in Calabasas is built around the property, the wind, the grade, and the fire code. Here’s what that means for the most common gates we install across Calabasas.
Driveway Gate Installation
Driveway gates in Calabasas are rarely simple. They’re ornamental wrought iron or powder-coated steel, often eight to twelve feet wide, and they sit at the end of a driveway that climbs. We size the operator for the actual gate weight and the slope, not just the leaf count, because a gate that fights gravity on a hillside driveway in Calabasas Park Estates burns out an undersized motor within a year or two. A typical single driveway gate with a standard opener runs $5,200 to $9,500. A double driveway gate with a heavier operator and safety edges runs $8,800 to $16,500.
Pedestrian Gate Installation
Pedestrian gates get installed two ways in Calabasas: as a standalone entry beside a driveway gate, or as a matching piece within a larger estate entrance. These run $1,800 to $4,200 depending on ironwork, width, and whether you want a keypad or intercom wired in. We also see a lot of pedestrian gates that serve as the back gate on Calabasas hillside homes, where the slope means we’re setting the post deeper and using a heavier gauge than a flat-lot install in West Hills would need.
Sliding Gate Installation
Sliding gates make sense on Calabasas driveways where the grade climbs immediately from the street, or where a swing gate would need to clear a retaining wall. A new motorized sliding gate with track, cantilever hardware if needed, and an operator generally runs $7,000 to $15,000. The track matters more here than people expect: Santa Ana winds push sliding gates laterally, and a gate that’s already derailed once will derail again unless the track is re-bedded and the rollers are rated for the wind load.
Swing Gate Installation
Swing gates remain the most common design in Calabasas, mostly because they match the Mediterranean and Spanish Colonial style of the homes. A single swing gate with an operator starts around $4,500 and runs to $9,000. A double swing gate with both leaves automated, safety photocells on both sides, and a stronger opener runs $9,500 to $18,000. On Calabasas hillside properties we recommend articulating-arm operators over buried-arm operators for swing gates: the buried arms don’t like the combination of slope, wind, and debris that accumulates in the foothills.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Calabasas
We’re factory-trained on nine gate automation brands. The three that show up most in Calabasas are FAAC, BFT, and Linear. FAAC and BFT hydraulic operators dominate the HOA gates and older estate entrances in communities like The Summit and Cold Creek. Linear is common on residential swing gates installed from the mid-2000s onward. We keep common boards, limit switches, and photocells for these brands in our local inventory, so a Calabasas gate isn’t waiting on a part to ship from the Midwest. If a frame is cracked or a roller bracket has snapped, our Gate Parts & Welding in Calabasas capability means we fabricate and weld on-site rather than ordering. Our technicians diagnose the brand on the first visit and fix it on the first visit in most cases, because we’re not learning the operator while you stand in the driveway. We already know it.
Common Gate Installation Problems We See in Calabasas Homes
We could write a book. Here are the four we see most often, from the neighborhoods east of Las Virgenes Road up to the hillside tracts off Mulholland Highway.
- Sagging double swing gates from worn hinge posts. Decades of 60-plus mph Santa Ana wind events flex the post at the footing, and the gate starts binding on the latch side. A hinge adjustment buys a few months. Re-pouring the post footing with a larger diameter and deeper embedment fixes it for decades.
- Pre-2018 operators without UL 325 entrapment protection. The operator still runs, but it won’t reverse if a child or pet is in the gate’s path. Replacing only the control board doesn’t add the safety features. You need the full operator, and on a Calabasas property that’s a safety issue, not a convenience upgrade.
- Post-Woolsey Fire gates without Knox key switches. LA County Fire Department requires Knox key-switch access on automated gates serving rebuilt hillside properties. We see gates installed after 2018 that never had one, or that were installed by crews from outside the area who didn’t know the requirement. The gate works. It’s also non-compliant, and it can delay emergency response when seconds count.
- Sliding gates pulled off track by Santa Ana gusts. A gate with a light-duty track and rollers will jump the track in one strong wind event. We rebuild with heavier track, better roller bearings, and if the grade supports it, we convert to a cantilever system that doesn’t ride on a track at all.
Pricing for Gate Installation in Calabasas, CA
Here are real numbers for the Calabasas market, not national averages that mean nothing to a homeowner in the 91302 ZIP code.
- Single swing driveway gate with operator: $4,500-$9,000
- Double swing driveway gate with operator and safety edges: $9,500-$18,000
- Sliding gate with track and operator: $7,000-$15,000
- Pedestrian gate: $1,800-$4,200
- Knox key switch retrofit on an existing gate: $350-$650
- Post re-pour and gate realignment: $1,200-$3,000 depending on gate size and access
What moves the price in Calabasas is the gate’s size, the steel gauge, the operator’s duty cycle, whether the grade requires a higher-torque motor, and whether the job needs fire-code retrofits like Knox switches or fail-open provisions. We quote every job in writing before a single bolt is turned, and that price is the price. Call (213) 293-3886 for a free estimate. We also offer $50 off any repair over $250 and a free second opinion on any written estimate you already have.
We Also Serve Cities Near Calabasas
Our Gate Installation crews based out of the Los Angeles metro office serve Calabasas first, and we regularly take on gate work in West Hills, Agoura Hills, Oak Park, and Westlake Village. The same crew that re-poured your neighbor’s post in Calabasas will be the one who shows up in Agoura Hills, with the same truck, the same tools, and the same written promise.
Serving Calabasas, CA - Our Local Coverage Area
We’re based in the Calabasas area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Calabasas
No, and this is one of the most common misunderstandings we correct in Calabasas. A control board replacement fixes the electronics, but if the operator was built before 2018, it still lacks UL 325 entrapment protection: the photocells, the contact edges, the reversing sensitivity. Replacing only the board leaves you with a working gate that’s still a safety hazard. The honest answer is that you need a new operator, and on a Calabasas property with a double gate or a hillside slope, we’ll often say the same about the hinges and posts while we’re there. Call (213) 293-3886 and we’ll tell you what’s actually needed, not what’s easiest to bill.
If the gate is automated and serves a community entrance or a hillside property rebuilt after the Woolsey Fire, then yes, the LA County Fire Department requires a Knox key switch and in most cases a fail-open provision. The fire department has to be able to access that gate during an emergency without waiting for the property manager. We install Knox switches on gates throughout Calabasas, and we’ve had to retrofit them onto gates installed by out-of-area crews who didn’t know the code. We also handle our Gate Access Control in Calabasas setups, so the switch integrates cleanly with your existing entry system. If your HOA gate was installed in the last five years and you’re not sure it has a Knox switch, call us. We’ll check it the same visit.
Because in Calabasas, the problem is almost never the hinge. It’s the post. Years of Santa Ana wind events, some gusting well past 60 mph, flex the post at the footing until the concrete cracks and the post leans. You can adjust the hinges for a while, but the gate keeps sagging because the entire post is moving. The real fix is to cut out the old footing, re-pour it deeper with a wider base, and reset the post. After that, the hinge adjustment actually holds. This is the single most common repair we do on older Mediterranean estate gates in neighborhoods like Mulwood and Calabasas Hills.
Yes, and in most cases you should replace the whole track and the rollers together. A bent track on a hillside gate in Calabasas usually means the gate slammed into the end stop during a wind event, or the track was undersized for the gate’s weight and slope from the start. Patching the bent section buys a few months. Re-bedding the track on a proper concrete base and upgrading the rollers to a heavier bearing fixes it. On steeper driveways we often recommend converting to a cantilever sliding gate, which eliminates the track problem entirely. Call (213) 293-3886 and we’ll assess it in person.
Not necessarily. We’ve rebuilt post-fire gates throughout Calabasas where the frame was still sound and only the automation, the posts, or one leaf needed work. But if the gate was installed before 2018, you’ll also need to bring it up to current safety and fire-code standards: UL 325 entrapment protection on the operator, Knox key-switch integration, and on hillside properties, the LA County Fire Department’s fail-open provisions. Sometimes the cheapest answer is a full replacement with all of that built in from day one. We’ll walk the gate with you and give you both numbers in writing, and you decide.
If your Calabasas gate is sagging, stuck, non-compliant, or just old enough that you’re tired of thinking about it, call Ironworks Gate Co. at (213) 293-3886. A live person answers, day or night. We’ll schedule a free estimate, quote a written price before any work starts, and stand behind the finished job with the 90-Day Done Right Promise. The gate you have should close like the day it was hung. If it doesn’t, that’s our problem to fix.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Calabasas and the surrounding areas for over 42 years.